Format

4202×2938 mm (including bleed)

Visible surface

4130×2903 mm

Material specifications

• There should be no motif labelling in the original. Therefore, it is important that each motif is labelled A, B, C etc in the file name for correct placement. One file per motif.
• Mounting is done from left to right.
• The boards are printed in 3 parts. Please adjust the placement of text and images so that small text or sensitive parts of the image do not get in the joints.
• We recommend placing texts/images 20 mm inside the visible surface.
  Distribution of Billboard national
  Download the file with an overview of the placements located under Downloads at the bottom of the page, and fill in the motif order. It should then be sent along when you send in your originals. The distribution is used to put the motifs in the right order and to calculate the print runs of each motif. If you have any questions, please contact print-se@bauermediaoutdoor.com.

Material deadline

• No later than 11 working days prior to the start of the campaign, the campaign layout and set-up instructions should be sent by e-mail to: print-se@bauermediaoutdoor.com
• Originals must be sent to us at least 11 working days before the start of the campaign.

Delivery of materials

Originals are delivered in full scale according to the format above. Images should be at least 70 dpi. Use the Coated Fogra39 colour profile (standard in Adobe CS). The format is always printed in CMYK, 4 colours.

Upload print-ready PDFs

on: http://bauermediaoutdoor.com/sv/resources/skicka-filer

1. ill: select "Printing - print" in the drop-down list.
2. From: Enter e-mail address.
3. Subject: Enter advertiser, campaign name and week.
4. Message: Enter any other relevant information about the original/campaign (e.g. motif distribution).